BandSorb HP Series
BandSorb HP series materials can be supplied in sheets as well as custom configurations, standard sheet size is 125 mm x 125 mm.
The BandSorb HP consists out of ferrite covered with a protective film on one side and adhesive tape on the other side.
Features and Benefits:
High magnetic permeability, low loss
RoHs, Halogen Free
BandSorb HP series can be used to improve the performance of:
- NFC antenna for mobile phones and automotive.
- NFC or RFID antenna for security & access control system.
- Wireless charging for mobile phones and battery powered handheld electronic devices
|Real Permeabilityemail@example.comMHz, 0.1V||μ'||150|
|Imaginary Permeabilityfirstname.lastname@example.orgMHz, 0.1V||μ”||<5|
|Ferrite Thicknesses||-||mm (mil)||0.1 (3.9)|
|Typical Thicknesses||-||mm (mil)||0.15 (5.9)|
|Tensile Strength||ASTM D 1000||MPa (psi)||6.4 (928)|
|Service Temperature||-||°C (°F)||-25 to 120 (-13 to 248)|
|Surface Resistivity||ASTM D 991||Ω-cm (Ω-in)||> 10 9 (>10 9 )|
|Compliance||2011/65/EU(RoHS 2.0) Compliance, Halogen Free|
– the technical specification data is based on SEM tests and analysis that we believe to be reliable. However, in no event, shall SEM be liable for inaccuracies or omissions contained therein. In all cases, details and values should be verified by the customer
-UL is a registered trademark of Underwriters Laboratories, Inc.,
* tested according to.
Product Number Example
|HP –||150 -||10 -||4040|
|Product Name||Permeability @ 13.56MHz||Thickness Ferrite (0.1mm)||Part Size code (40x40 mm)|