OP-3500 offers excellent thermal performance and superior conformability. It is a two-component liquid gap filling material, cured at either room or elevated temperature to speed up the curing process. The pre-curing material possesses good thixotropic characteristics as well as low viscosity which is an ideal solution for dispensing.

After cured, the mixture became a low modulus elastomer to relieve stresses during thermal cycling. OP-3500 will lightly adhere to surfaces, thus improving surface area
contact. The proprietary formulation of OP-3500 is RoHS compliant and halogen-free, providing extra reassurance in applications where hazardous
substances are forbidden.

Product Spec Sheet

Description

Features and Benefits

  • Superior thermal performance
  • 3.0 W/m-K thermal conductivity
  • Easy to dispense
  • Easy storage
  • Ultra-conforming for fragile and low stress applications
  • Ambient or accelerated cure schedules in elevated temperature

Typical Applications

  • Automotive electronics
  • PCBA to housing
  • Discrete components to housing
  • Fiber optic telecommunications equipment

Appliances Supplied

  • Dispensing Gun
  • Static mixer

Direction for Use

  • Install the twin barrel onto the gun, attach static mixer in front end
  • Squeeze the handle to press puncher for materials to come

Additional information

Color

White (Part A), Blue (Part B)

Viscosity [cP]

78000 (Part A), 87000 (Part B)

Construction & Composition

Soft silicone elastomer

Density

3.0 g/cm(3)

Mix Ratio

1:1

Shelf Life @ 25°C

6 months

Cured Color

Blue

Hardness after cured [Shore 00]

55

Cure Time at 25°C

10 hr

Continuous Use Temp

-60 to 200 °C

Thermal Conductivity [W/mk]

3.0

Dielectric Strength

250 V/mil

Dielectric Constant @ 1MHz

12.4

Volume Resistivity

10(13) ohm.cm

Flame Rating

U.L.94 V-O

Pot Life @ 25°C

60 min

Cure @ 100°C

10 min

Curing Time at 80℃

10 min

Fill Out the Form Below