Conductive NiCu –C70 Rip-stop Fabric Tape (CFT II)

CFT_IISchlegel Electronic Materials’ CFT(II) is made of using polyester rip-stop copper nickel fabric with high conductivity PSA. CFT (II) have an average shielding effectiveness over 96 dB in the frequency ranges from 20 MHz to 10 GHz.  In additional to the easy-to-apply properties to fit the most EMI shielding design, it is also ideal for grounding and sealing purpose.  And it is the most economical by comparing to other Schlegel EMI Conductive Tapes.

 

 

 

Sizes

Tape Width Tape Length Part Number
0.315" (8.0 mm) 36 yard (33m) rolls 5923-0031-0
0.500" (12.7 mm) 36 yard (33m) rolls 5923-0050-6
0.788" (20.0 mm) 36 yard (33m) rolls 5923-0079-2
1.000" (25.4 mm) 36 yard (33m) rolls 5923-0100-3
1.118" (30.0 mm) 36 yard (33m) rolls 5923-0118-8
1.157" (40.0 mm) 36 yard (33m) rolls 5923-0157-2
2.000" (50.8 mm) 36 yard (33m) rolls 5923-0200-5

 

Specifications

 

Fabric: Nickel-Copper plated polyester ripstop fabric.

Adhesive: High-tack, conductive adhesive system.

Surface Resistivity: <= 0.066Ω/sq.

Resistivity through adhesive: <=80 milliohms/square inch.

Low Temperature Application: -40℉ (-40℃)

Abrasion Resistance: No change in surface resistivity after more than 1,000,000 wear cycles.  Test method: ASMT D3886.

Shrinkage: <4% @ 180℃(356ºF) temperature.

Peel Strength: 50 oz. Per inch minimum initial. Test Method: ASTM D3330.

Shielding Effectiveness: 96dB Test method: Mil DTL 83528C.


.